Skip to main content
Home
term:~# less tar.gz.ro
Read-only. Think freely.

Main navigation

  • Home
    • My Yard Projects
  • AIX World
    • AIX Commands
    • HACMP Commands
    • HMC Commands
    • How to assign disks to AIX partition via VIO
    • Misc stuff
    • NIM (Network Installation Management)
    • Virtual I/O (VIO)
  • Apple World
    • News
    • Tips & Tricks
    • iOS
  • Audio Production
    • Audio fundamentals
  • CygWin World
    • CygWin Tips and Tricks
    • Cygwin: clone disk with dd
    • Cygwin: how to have multiple tabs in Cygwin's Mintty
    • Cygwin: start and enable sshd
    • config.guess: unable to guess system type
  • ESXi World
    • ESXi 7: Create VMFS Partition Via Command Line
    • ESXi : A bunch of useful commands and information
    • ESXi: How to change the hostname of an ESXi host
    • ESXi: how to change the MTU of vmkernek (vmk) interface (when UI fails)
    • ESXi: how to resize the OS partition
    • How to create a bootable USB installer of ESXi 7.0
  • Games
    • Assetto Corsa Rally – Early Access Deep Dive
    • Diablo 3 & Reaper of Souls tips
    • EA Sports WRC Time Trial Locations and Stages
    • EA Sports WRC vs Assetto Corsa Rally | Visual Comparison (Gravel, Asphalt, Wet, Night, Snow)
    • Global Chip Shortage? Build this oddity: PC From 2009 With GeForce GTX 1050ti 4G
    • Left4Dead Lan Play
    • Live Sessions
    • Mafia II Joe's Adventures - Playboy Locations
  • HP-UX World
    • Boot into HPUX L2000
    • How to increase the size of a filesystem in LVM
    • Miscellaneous
    • Performance tools
    • Working with HP VM
  • Hardware
    • 5 Months with iPhone 15 Pro: Not PERFECT But... Must See. From Gaming to ProRes Requirements.
    • Apple Watch Series 9? Not Yet! I Still Love My "Seven of Nine" 19 months later
    • Asus ROG Sheath in 2024: a HUGE Mousepad, Bigger Than Logitech G840 XL
    • Choose Your Perfect Mic / Lavalier | AIQIU M31 vs. Boya BY-M3/BY-M2 & Puluz PU425
    • DJI Mic Mini 2 – Real-World Review and Testing
    • How I Test Mousepads: Glide, Control, and Surface Noise Explained
    • How to build a 25U 600x600 Server Rack
    • I Tested Creative Pebble V2 on My Sim Rig – Surprising Results!
    • Icy Box IB-3805-C31 speed test
    • Is the RX 9060 XT Mercury Class Worth It? Silent Power Meets Real Gameplay
    • Logitech Pro X Wired Gaming Headset (2nd gen): review + mic test with G HUB on Windows 11 and macOS
    • Logitech RS H-Shifter - Amazing Feel, But There’s a Catch (As Always)
    • Mousepad Logitech G840
    • PX8 S2 – A Journey Through Sound, Expectations and Reality
    • Play Steam Games on iPhone with Backbone One Playstation Edition gen2 USB-C / Steam Deck Alternative
    • Qnap TR-004 short review - working with linux
    • Razer Gigantus V2 XXL – 5 Months Later (Still Worth It?)
    • Samsung 870 QVO 2TB: Speed Tests and comparison with Adata SU650 and Kingston K600
    • Server-Ready MS-01 - A Small PC with Everything: SFP+, USB4, 2.5gbps LAN, Enterprise SSD, TPM 2.0
    • TCL 34R83Q — One-Year Long-Term Review
    • The TCL 34R83Q is Insane
    • The TCL 34R83Q is Insane… But There’s a Catch! Honest Review About a Real Product! Read Description.
    • The one with APC Back-UPS BE850G2-GR: Charge Whatever With It, From Phone to Computer And BEYOND :D
    • Thermaltake Pure 20 fan - HUGE and quiet!
    • Ubiquiti EdgeRouter X lift off
    • VIOFO A139 Quad HD Dash Camera - 3 Channels Camera in a 2 Channels Package. Confused?
    • Why Bluetooth Headphones Switch to MONO When Using the Microphone?
    • Why the Logitech PRO Racing Wheel Made Me a Better Driver
  • Home
  • Linux World
    • Alternative to finger command? Sure: pinky :)
    • Backup/restore/reinstall tips
    • Copy one file in linux with progress bar, using pv
    • DNSKEY: verify failed due to bad signature (keyid=19297): RRSIG has expired
    • DRBD: How to replace drbd backend devices
    • Debian 11: Unable to locate package glances
    • Debian 13: missing last command
    • Debian Bullseye (11): zpool command missing
    • Debian DRBD: How to resize drbd and OCFS2 online
    • Debian DRBD: How to resize drbd volume on top of LVM
    • Debian DRBD: Tips, Tricks and Commands
    • Debian Heartbeat: Commands, Tips and Tricks
    • Debian Heartbeat: STONITH errors when configuring CRM cluster
    • Debian Jessie: how to enable and start OpenVPN
    • Debian Tips & Tricks
    • Debian on mac mini: Core temperature above threshold, cpu clock throttled
    • Debian: Can't locate LWP/UserAgent.pm in @INC
    • Debian: HA (cluster) NFS with DRBD and Heartbeat
    • Debian: How to install, configure and manage ZFS
    • Debian: How to split rc.local in rc.local.stop and rc.local.start
    • Debian: Install and configure AFP server
    • Debian: LVM on ISCSI not activated on reboot.
    • Debian: The repository does no longer have a Release file
    • Debian: add and configure VLAN
    • Debian: how to choose default kernel in grub2
    • Debian: how to create bonding device
    • Debian: install open-vm-tools
    • Debian: pdo_mysql.so: undefined symbol: pdo_parse_params in Unknown on line 0
    • Debian: reinstall zfs when changing the linux kernel
    • Debian: ssh key no longer works after upgrading to Debian version 9
    • Docker: Pi-Hole - Failed to set capabilities on file `/usr/bin/pihole-FTL' (Operation not supported)
    • Gnome: Clear "Open With" list
    • How to add a swap file in linux
    • How to add an ISCSI disk from linux server
    • How to add exfat support on RHEL 6
    • How to be sure network interfaces have always the same names
    • How to check which local device is assigned to which iscsi disk
    • How to configure GlusterFS with a volume replicated over 2 nodes
    • How to create an encrypted image
    • How to create bond device under linux
    • How to create/modify a file's timestamp
    • How to give more memory to Lotus Notes in Linux
    • How to install bind (name server) in chroot environment
    • How to install mplayer on RHEL 6
    • How to install openoffice 4.0.1 on Fedora 20/19/18, CentOS/Red Hat (RHEL) 6.5
    • How to install python 2.7 on Red Hat Enterprise Linux Workstation release 6.5 (Santiago)
    • How to modify the hostname on Linux
    • How to mount a HFS partition in linux as Read/Write?
    • How to properly configure oidentd for IRC connections
    • How to read MBR
    • How to remove LVM snapshots if you get message "Can't remove open logical volume"
    • How to setup OpenVPN server for iPhone
    • How to show UUID of a block device, including other attributes too
    • How to speed up things by using tmpfs (your memory)
    • How to switch from pc to efi and recreate boot partition
    • How to test ethernet speed with iperf
    • How to write CD or DVD under linux's console
    • ISCIS: remove disk from linux client
    • LVM
    • Linux Network Tips and Tricks
    • Linux: CPU utilization vs. load average
    • Linux: How to clear (delete) a GUID partition table (GPT)
    • Linux: TCP keepalive or not
    • Linux: Tuning network cards on Linux
    • Linux: how to check if the disk is SSD or not
    • Network Manager - get_secrets_cb(): Couldn't get connection secrets
    • RHEL6: yum update - package is a duplicate with package
    • RPM Tips and Tricks
    • ReiserFS: how to recover deleted files
    • ShellShock - Fix Bash on Debian Lenny
    • ShellShock - Fix Bash on Debian Squeeze
    • Spamassassin: eval/lookup failed: available_nameservers: No DNS servers available!
    • Start restricted graphical apps
    • Systemd startup order
    • The Nano Incident: How a Text Editor Almost Took Down My Database
    • Ubuntu: Fast Install With VMware Fusion
    • User Management
    • Using Mdadm
    • Wi-FI KO after upgrade to RHEL 6.5
    • ZFS: Convert a One Disk Pool in Two Disks Mirror
    • ZFS: cannot import 'whatever': no such pool available
    • how to resize iscsi volume in Linux
    • rc.openvpn for slackware
  • Proxmox
    • Proxmox LXC Recovery: What Happens When Your LVM-Thin Pool Runs Out of Space
  • Sim Racing & Driving
    • Assetto Corsa Rally vs Real Life – La Bollène-Vésubie → Col de Turini | Monte-Carlo Rally
    • DiRT Rally 2.0 vs. Real Life | Pra d'Alart → Col de Turini | Monte-Carlo Rally
    • EA Sports WRC vs Real Life – La Bollène-Vésubie → Col de Turini | Monte-Carlo Rally
    • Force Feedback, Steering Feel and Tactile Feedback: Getting More Out of a Sim Racing Rig
    • From G29 to PRO and RS50
    • G932 vs. RS50 vs. PRO: Is Newer Actually Better?
    • How Accurate Is Assetto Corsa Rally? | Col de Turini → Peïra Cava
    • Logitech RS Pedals vs PRO Racing Pedals: What's Actually Different?
  • Solaris World
    • Tips & Tricks
  • Windows World
    • Active Directory Command Line (CMD) Tips & Tricks
    • Excel: extract text between two different characters
    • Excel: seconds in hours:minutes:seconds
    • PowerShell tips and tricks
    • Windows 7: How to repair boot partition
    • Windows 7: Steam not starting
    • Windows 7: how to disable/enable hibernation
    • Windows CMD commands
  • Tips & Tricks
    • Apache Tips & Tricks
    • Audio / Video *nix Command Line Tricks
    • Bombardier: How to use it to Download Boot Camp Drivers
    • Brigadier: How to use to Download Boot Camp Drivers
    • Citrix XEN: Install VM OS via CLI
    • Citrix Xen CLI Tips & Tricks
    • Citrix Xen: Connect to VM's VNC console
    • Citrix Xen: How to "migrate" VHD lv from one XEN to another with dd
    • Citrix Xen: How to attach an existing vdi to any virtual machine
    • Citrix Xen: How to rename a vm via command line
    • Citrix Xen: How to show vm information via command line
    • Citrix Xen: Modify VM memory value via CLI
    • Docker Tips and Tricks
    • Docker: Create a Custom Image
    • Docker: How to Check Which Docker Container is Using the Space in Linux
    • Docker: How to Run Your Own Docker Registry (e.g. Images Repository)
    • Docker: Install on Debian
    • Docker: Playing with consul
    • Docker: UNIX socket and TCP port
    • Docker: how to enable swap limit capabilities
    • Docker: how to increase php memory "the docker way"
    • Docker: syslog-ng setup
    • Drupal 7 to Drupal 10 Migration and Configuration Notes
    • Executing commands remotely on multiple systems via SSH
    • FIO Perf Tool Nutshell
    • Flushing the ARP cache
    • FreeNAS console tricks
    • Gallery2 - Gd - How to create thumbnails with fixed width while keeping the aspect ratio (variable height)
    • Gallery2 - Imagemagick - How to create thumbnails with fixed width while keeping the aspect ratio (variable height)
    • Gallery2 - Netpbm - How to create thumbnails with fixed width while keeping the aspect ratio (variable height)
    • How to change the hostid of a Linux operating system
    • How to create a hash password from text
    • How to delete files or directories that contains special characters
    • How to display the output of a file without the blank lines
    • How to enable rstatd
    • How to encrypt a file in linux (or cygwin)
    • How to find out which process is using some port
    • How to login to youtube account via Apple TV if you have Google Authenticator enabled
    • How to resume failed scp transfer
    • How to rotate pdf files with pdftk tool
    • How to send a json from command line
    • How to use an LVM partition as VirtualBox disk
    • IBM DS System Storage common commands examples
    • ImageMagick Tricks
    • Logging ssh sessions
    • Merge mp3 files
    • Miscellaneous
    • MySQL Commands, Tips and Tricks
    • Nagios Stuff
    • Nagios: UNKNOWN: Drive S/N : No health status line found,
    • Networking - questions and answers
    • Oracle: How to connect to the listener and display a parameter's value
    • Oracle: How to list DBA users for a database
    • Oracle: dbfsize Header block magic number is bad
    • Oracle: display tablespace information with sizes
    • PHP: How to display in a table, information from a text file
    • Python: fake smtp server
    • Render Blocking JavaScript and CSS
    • Runlevels
    • SAP useful commands for UNIX administrator
    • SMF Tips and Tricks
    • Script to get memory usage of desired processes
    • Strings or File Manipulation
    • The Hard Link
    • Using Find Command
    • Using VI Editor
    • VirtualBox Tips&Tricks
    • VirtualBox: How to Add Serial Port for Linux Cluster Heartbeat Monitoring
    • VirtualBox: How to work with ISCSI disks
    • dsmc commands
    • iMessage “Waiting for Activation” Error on iPhone
  • Exclamation!
    • Bash CVE-2014-6278 CVE-2014-6277
    • Heartbleed Bug
    • PHP2Shell: Critical PHP Remote Code Execution Vulnerabilities
    • Ransomware KeRanger attached to Transmission app
    • Shellshock (CVE-2014-6271)
  • About This
    • Cookies, Cookies, Cookies!
  • Donate
User account menu
  • Log in
Popular content

Today's:

  • PHP2Shell: Critical PHP Remote Code Execution Vulnerabilities and Website’s Impact
  • €6,000 MacBook Pro: Should I Throw It Away After 6 Years?
  • Proxmox LXC Recovery: What Happens When Your LVM-Thin Pool Runs Out of Space
  • Drupal 7 to Drupal 10 Migration and Configuration Notes
  • TCL 34R83Q — One-Year Long-Term Review
  • Linux Networking: How to disable/enable offload features, RX/TX checksum, scatter, gather and beyond
  • Brigadier: How to use it to Download Boot Camp Drivers
  • Cookies, Cookies, Cookies!
  • Assetto Corsa Rally vs Real Life – La Bollène-Vésubie → Col de Turini | Monte-Carlo Rally
  • The Nano Incident: How a Text Editor Almost Took Down My Database

All time:

  • Linux Networking: How to disable/enable offload features, RX/TX checksum, scatter, gather and beyond
  • Tivoli Storage Manager Client Commands (dsmc commands)
  • Centrify Useful Commands and Information
  • Run ZIM on OS X and create Zim.app
  • How to be sure network interfaces have always the same names
  • Linux backup/restore/reinstall
  • How to add exfat support on RHEL 6
  • Mafia II Joe's Adventures - Playboy Locations
  • HMC commands
  • Command Line Software Update in MacOS

Last viewed:

  • Fanatec ClubSport GT Seat – Long-term Experience
  • Logitech RS Pedals vs PRO Racing Pedals: What's Actually Different?
  • AIX: ssh fail to start on wpar
  • Server-Ready MS-01 - A Small PC with Everything: SFP+, USB4, 2.5gbps LAN, Enterprise SSD, TPM 2.0
  • Razer Gigantus V2 XXL – 5 Months Later (Still Worth It?)
  • OS X: How to get the text console from the login screen
  • SAP Useful Commands for UNIX administrator
  • Logitech G923 vs RS50 vs PRO: Is Newer Actually Better?
  • Networking ABC - questions and answers
  • AIX Misc stuff

Breadcrumb

  1. Home

Logitech Sim Racing Ecosystem: From G29 to PRO and RS50

Profile picture for user root
By root, 17 November, 2026

Introduction

Logitech has been making consumer racing wheels for a long time, but its sim racing product range has changed considerably over the years. What started as relatively simple wheel-and-pedal bundles has gradually developed into a more modular ecosystem, with separate wheelbases, steering wheel hubs, interchangeable peripherals and different ways of connecting hardware from older and newer product generations.

The G29, G920 and G923 represent the familiar generation of Logitech racing wheels, where the steering wheel, force feedback mechanism and main electronics are integrated into one unit. The PRO Racing Wheel and the newer RS50 move towards a more modular Direct Drive architecture.

There is also an assortment of accessories and peripherals that connect these products together:

  • PRO Racing Wheel and RS50 wheelbases.
  • PRO Racing Pedals and RS Pedals.
  • RS Shifter & Handbrake.
  • RS H-Shifter.
  • Driving Force Shifter.
  • Logitech G Racing Adapter.
  • Different steering wheel hubs, rims and mounting accessories.

Understanding how these components work together is important, especially when upgrading an existing Logitech setup. Not every peripheral uses the same connector, not every product connects in the same way, and PC compatibility does not automatically mean that the same configuration will work on a console.

This article looks at the Logitech sim racing ecosystem as a whole, how its different generations fit together, and what to consider when building or upgrading a setup.


1. Understanding the Different Generations

Logitech's racing products can broadly be divided into two groups: the older integrated wheel systems and the newer modular ecosystem.

1.1. The G29, G920 and G923 generation

The G29, G920 and G923 follow a traditional design.

The steering wheel, force feedback mechanism and electronics are integrated into a single housing. The pedals and shifter are separate accessories, but they connect through the wheel rather than functioning as independent USB peripherals in their standard console configuration.

Their main characteristics include:

  • Integrated steering wheel and force feedback unit.
  • Gear-driven force feedback mechanism.
  • Separate pedal set connected to the wheel.
  • A dedicated connection for the Driving Force Shifter.
  • USB connection to the host platform.

Although these products belong to an older hardware generation, they remain part of Logitech's ecosystem. Their existence is particularly relevant because Logitech provides ways to reuse some of their peripherals with newer wheelbases.

The G29, G920 and G923 should not be treated as identical products in every respect. They differ in platform compatibility, steering wheel controls and other product-specific details. However, their general connection architecture is similar.

1.2. The PRO and RS generation

The PRO Racing Wheel and RS50 represent a different approach.

Instead of relying on a gear-driven mechanism, these products use Direct Drive technology. The motor drives the steering shaft directly, without the gear transmission used in the older G-series wheels.

The newer ecosystem is also more modular. Depending on the product and configuration, the wheelbase, steering wheel interface, pedals and other peripherals can be selected and connected separately.

This makes it possible to build a setup around individual components rather than purchasing an all-in-one wheel package.

The RS50 and PRO are not simply two names for the same product. They occupy different positions in the range and have different specifications, but both belong to Logitech's modern Direct Drive ecosystem.

The detailed differences between the G923, RS50 and PRO are covered separately in:

Logitech G923 vs RS50 vs PRO: Is Newer Actually Better?


2. The Wheelbase: The Centre of the Setup

The wheelbase is the component responsible for generating the steering forces that the driver feels through the wheel.

In the older G29/G920/G923 systems, the force feedback mechanism is integrated into the steering wheel unit.

With the PRO and RS50, the wheelbase is a separate Direct Drive unit. The steering wheel interface is attached to it, allowing a more modular arrangement.

A modern wheelbase is responsible for several functions:

  • Generating force feedback.
  • Controlling steering torque and response.
  • Reading steering input.
  • Communicating with the game and host platform.
  • Managing connected steering wheel and peripheral functions, depending on the model.

The wheelbase is therefore more than just a motor. It is the central controller of the steering system.

2.1. Steering wheels and hubs

The RS ecosystem introduces a more modular approach to the steering wheel itself.

The RS Wheel Hub acts as the interface between a compatible wheelbase and the steering wheel rim. This allows the user to choose a suitable steering wheel configuration rather than being restricted to one permanently integrated design.

The PRO range also has its own steering wheel hardware and compatibility options.

When selecting a steering wheel or hub, it is important to check:

  • Whether the hub is compatible with the intended wheelbase.
  • Whether the steering wheel uses the correct quick-release interface.
  • Whether the required buttons, paddles and controls are supported.
  • Whether the selected wheelbase version supports the intended platform.

A compatible physical connection does not necessarily guarantee that every button or additional function will work in every game. Game support and platform compatibility still matter.

2.2. Quick release systems

A quick-release system allows the steering wheel to be attached to and removed from the wheelbase without dismantling the entire setup.

This is particularly useful when using different steering wheel configurations for different types of racing.

For example, a user might prefer a round steering wheel for rally or drifting and a more specialised rim for circuit racing.

Logitech offers its own wheel and hub configurations, along with accessories such as the RS QR Adapter. Compatibility should always be checked before combining different wheel and hub components.


3. Pedals: Separate Components, Different Connection Options

Pedals are one of the most important parts of a sim racing setup. They determine how the driver controls acceleration, braking and, where available, the clutch.

Logitech offers several pedal configurations, including the older pedal sets supplied with G-series wheels, the RS Pedals and the PRO Racing Pedals.

The newer pedal systems use a different connection approach from the older G-series pedal sets.

3.1. Older G-series pedals

The pedal sets supplied with the G25, G27, G29, G920 and G923 use the older connection architecture.

In their normal configuration, they connect to the wheel through a dedicated multi-pin connector. They are not simply USB pedal sets that can be plugged directly into any computer.

This is one of the reasons the Racing Adapter exists: it allows supported older pedal sets to be used with newer RS and PRO wheelbases.

3.2. RS Pedals

The RS Pedals belong to the newer modular ecosystem.

They use a USB connection and can be connected in different ways depending on the platform:

  • To a compatible Logitech wheelbase.
  • Directly to a PC through USB.
  • Through the Racing Adapter when used with a supported older Logitech wheel.

There is an important platform distinction here. When playing on a console, the RS Pedals must be connected to a compatible Logitech steering wheel rather than directly to the console's USB port.

On PC, they can operate as their own USB device. Most titles can recognise them independently, although some games may work better when the pedals are connected through the wheelbase.

The RS Pedals are also modular in terms of their configuration. The clutch is an additional module rather than an integral part of the standard two-pedal configuration.

3.3. PRO Racing Pedals

The PRO Racing Pedals are Logitech's higher-end pedal system.

They use a pressure-sensing load-cell brake and separate accelerator and clutch pedals. Their construction and adjustment options differ from those of the RS Pedals.

Although both pedal ranges share the same broad approach to load-cell braking, they should not be considered mechanically identical. Their detailed differences deserve a separate comparison.

See:

Logitech RS Pedals vs PRO Racing Pedals: What's Actually Different?

3.4. Understanding load-cell braking

Traditional potentiometer-based brakes primarily measure pedal position. A load-cell brake measures the force applied to the pedal.

This changes the way braking input is interpreted.

Instead of relying mainly on how far the pedal travels, the system uses applied pressure to determine the braking input. This allows the driver to develop a more repeatable braking technique based on muscle memory and applied force.

It is important to distinguish between the physical feel of the pedal and the electronic interpretation of the applied force.

A force adjustment setting can change how much pressure is required to reach 100% brake input without necessarily changing the physical stiffness of the pedal itself.

This distinction is relevant when configuring Logitech's load-cell pedal systems and will be explored in more detail in the dedicated pedal article.


4. Shifters and Handbrakes

Logitech offers several ways to add manual shifting and handbrake controls to a sim racing setup.

These products are not interchangeable in every respect, and their connection methods depend on the wheelbase and platform.

4.1. Driving Force Shifter

The Driving Force Shifter is the older Logitech H-pattern shifter.

It provides six forward gears and reverse, using a traditional mechanical gear lever.

It was originally designed for products such as the G29 and G920, but Logitech also supports using it with newer RS and PRO wheelbases through the Racing Adapter.

This is particularly useful for users who already own the older shifter and want to upgrade their wheelbase without replacing every peripheral.

4.2. RS Shifter & Handbrake

The RS Shifter & Handbrake is a newer peripheral designed for sequential shifting and handbrake use.

It is not an H-pattern shifter. It combines sequential shifting and handbrake functionality in one unit.

The device offers different input modes, including digital and analogue handbrake operation. The analogue handbrake axis is particularly useful in rally and drifting games, where controlling the amount of handbrake input can be important.

The RS Shifter & Handbrake can connect directly to a PC through USB. In this configuration, it appears as an independent device, and its functions need to be assigned in the game.

It can also connect to compatible Logitech wheelbases through their USB connections.

When connected to an older G29, G920 or G923, the Racing Adapter is required. However, this older connection method has limitations because those wheels were originally designed around a single shifter port.

Consequently, not every function is available in every configuration or game.

4.3. RS H-Shifter

The RS H-Shifter is a separate product for users who prefer a traditional H-pattern gearbox.

It should not be confused with the RS Shifter & Handbrake. They serve different purposes:

  • RS Shifter & Handbrake: sequential shifting and handbrake functionality.
  • RS H-Shifter: traditional H-pattern gear selection.

The correct choice depends on the type of cars and games being used.


5. The Logitech G Racing Adapter

The Racing Adapter is one of the most important components in the Logitech ecosystem because it provides compatibility between different hardware generations.

Older Logitech peripherals use a different connection architecture from the newer RS and PRO products. The Racing Adapter bridges this gap.

It allows supported older peripherals to be used with newer wheelbases and, in some configurations, newer peripherals to be used with older G-series wheels.

5.1. What does the Racing Adapter actually do?

The adapter provides connections for supported older Logitech peripherals and allows them to communicate with compatible newer hardware.

It is particularly useful in two situations:

  • Upgrading to an RS50 or PRO wheelbase while keeping an older pedal set or Driving Force Shifter.
  • Keeping a G29, G920 or G923 wheel while upgrading to RS or PRO pedals.

The adapter also includes a brake-force adjustment dial for compatible RS and PRO load-cell pedal configurations when used with older G-series wheels.

The adapter is not required when connecting compatible RS or PRO pedals directly to an RS50 or PRO wheelbase.

5.2. Compatibility overview

The following table summarises the main connection possibilities documented by Logitech.

Peripheral RS50 / PRO wheelbase G29 / G920 / G923
Older G-series pedals Racing Adapter required Original connection
RS / PRO pedals Direct connection Racing Adapter required
Driving Force Shifter Racing Adapter required Original connection
RS Shifter & Handbrake Compatible USB connection, depending on wheelbase Racing Adapter required; functionality is limited by the older shifter interface

The Racing Adapter also supports pedal sets from the G25 and G27 in the documented RS50 compatibility configuration.

The table is a general overview, not a guarantee that every combination works on every platform or in every game. The exact product version and connection method matter.

5.3. PC versus console connections

The distinction between PC and console support is particularly important.

On PC, many newer Logitech peripherals can connect directly through USB and appear as separate devices. This provides more flexibility when configuring a setup.

For example, the RS Shifter & Handbrake can connect directly to the computer. The game can then assign its sequential shifting and handbrake functions independently.

On consoles, the situation is different. USB connectivity alone does not guarantee that a peripheral will be recognised. The device generally needs to be connected through a compatible wheelbase or supported adapter configuration.

This is also why a configuration that works perfectly on PC may not work in the same way on PlayStation or Xbox.

5.4. Limitations when using older wheels

The G29, G920 and G923 were not designed around the newer modular peripheral architecture.

They have a dedicated shifter connection, originally intended for the Driving Force Shifter.

When an RS Shifter & Handbrake is connected through the Racing Adapter, it uses this older shifter interface. As a result, the wheel may identify it as a Driving Force Shifter in G HUB, even though the connected hardware is different.

This does not necessarily mean that the device is malfunctioning. It is a consequence of the way the older wheel communicates with the adapter.

Logitech also documents game-specific compatibility limitations for this configuration, particularly on consoles.


6. G HUB and Software Configuration

Logitech G HUB is the main software used to configure and manage the newer Logitech G gaming and sim racing hardware.

Depending on the connected device, G HUB can provide access to:

  • Device recognition and configuration.
  • Firmware updates.
  • Force feedback settings.
  • Steering wheel and pedal configuration.
  • Button assignments.
  • Profiles and game-specific settings.

The available settings depend on the product and connection method.

For example, a peripheral connected directly to a PC may expose more configuration options than the same device connected through an older wheel's shifter interface.

6.1. Device recognition is not the same as game compatibility

There are several separate stages involved when using sim racing hardware:

  • The operating system must recognise the device.
  • The Logitech software must identify and configure it, where applicable.
  • The game must support the device or its input functions.
  • The game must allow the required controls to be assigned correctly.

A device appearing in G HUB does not automatically mean that every game supports all of its functions.

Likewise, a device working in one game does not guarantee identical behaviour in another.

This is particularly relevant when using separate USB peripherals, sequential shifters, analogue handbrakes and multiple input devices.

6.2. Profiles and game-specific settings

Force feedback and input settings can vary considerably between games.

A profile that works well in a circuit racing simulator may not be ideal for a rally game or an arcade racing title.

The same applies to steering rotation, force feedback strength, damping and other available parameters.

It is therefore useful to understand the difference between:

  • Wheelbase settings, which configure the hardware.
  • G HUB settings, which configure supported Logitech devices on PC.
  • In-game settings, which determine how the game interprets steering, pedals and force feedback.

These settings interact, but they are not necessarily interchangeable.


7. Force Feedback and TRUEFORCE

Force feedback is the system that communicates steering forces to the driver through the wheel.

Traditional force feedback uses the game's steering and vehicle physics calculations to generate the forces sent to the wheelbase.

TRUEFORCE is Logitech's additional force feedback technology. It uses supported game information, including physics and audio-related data, to provide additional detail through the wheel.

It is important to understand that TRUEFORCE does not replace the normal force feedback system. It adds another layer of feedback.

The G923 introduced TRUEFORCE to Logitech's more accessible gear-driven wheel range. The PRO and RS50 also support TRUEFORCE, bringing the technology into the Direct Drive ecosystem.

However, TRUEFORCE support depends on the game. A wheelbase supporting the technology does not mean every game will use it.

The implementation and available effects can also vary between titles.

A more detailed discussion of TRUEFORCE, its relationship with Direct Drive and the differences between Logitech's wheelbases belongs in the dedicated wheelbase comparison article.


8. Mounting and Rig Considerations

The mechanical installation of sim racing hardware is just as important as its electronic compatibility.

A wheelbase can generate substantial force, and the structure supporting it needs to withstand those forces without excessive movement or flex.

8.1. Desk mounting

Some Logitech wheel products are designed to be mounted on a desk using integrated clamps or compatible accessories.

This is convenient for casual use and for people who do not have a dedicated sim racing rig.

However, a desk needs to be sufficiently strong and stable. A lightweight desk can flex or move under force feedback, especially with more powerful wheelbases.

The RS50 has a separately available table clamp, while the PRO configurations have their own mounting arrangements. Always check which mounting hardware is included with the specific product being purchased.

8.2. Wheel stands and dedicated rigs

A wheel stand or dedicated cockpit provides a more stable mounting platform.

This becomes increasingly important as the force feedback system becomes more powerful.

A flexible wheel mount can introduce unwanted movement and make it harder to interpret the forces coming from the wheelbase.

The same principle applies to pedals. A load-cell brake can require substantial force, so the pedal plate and the overall cockpit structure need to be sufficiently rigid.

8.3. Pedal positioning

Pedal positioning affects comfort, consistency and control.

The distance between the pedals, their angle, height and inclination can all influence how naturally the driver operates them.

A modular pedal system provides more flexibility when adjusting the position of individual pedals, but the mounting structure still needs to support the forces applied during braking.

A good setup should allow the driver to apply the required brake pressure without the pedal assembly moving or the seat shifting backwards.


9. Building or Upgrading a Logitech Setup

One of the advantages of the newer Logitech ecosystem is that users do not necessarily need to replace every component at the same time.

The Racing Adapter makes it possible to reuse supported older peripherals, while the newer USB-based products allow a more modular approach.

There are several possible upgrade paths.

9.1. Keeping an older wheel and upgrading the pedals

A user with a G29, G920 or G923 can upgrade to RS or PRO pedals without replacing the wheelbase immediately.

The Racing Adapter provides the required connection.

This is useful for someone who wants to improve braking control while keeping the existing steering wheel.

9.2. Upgrading the wheelbase while keeping older peripherals

A user moving from a G29, G920 or G923 to an RS50 or PRO wheelbase can keep supported older pedals and the Driving Force Shifter by using the Racing Adapter.

This reduces the number of components that need to be replaced during an upgrade.

It is still important to check the limitations of the older peripherals. Reusing an existing component does not necessarily provide the same functionality as using a newer dedicated accessory.

9.3. Moving to a fully modular setup

A more complete upgrade involves selecting the wheelbase, steering wheel, pedals and accessories separately.

This provides more freedom when choosing components for different racing disciplines.

For example:

  • A Direct Drive wheelbase for steering feedback.
  • A steering wheel configuration suited to the type of racing.
  • Load-cell pedals for more consistent braking.
  • A sequential shifter for rally or other sequential-transmission cars.
  • An H-pattern shifter for cars using a traditional manual gearbox.
  • An analogue handbrake for rally and drifting.

The advantage of a modular setup is that individual components can be changed without necessarily replacing the entire system.


10. Common Compatibility Questions and Misunderstandings

Can RS or PRO pedals connect directly to a PC?

The RS Pedals can connect directly to a PC through USB and operate as an independent device. This is one of the advantages of their newer connection architecture.

The exact behaviour of other pedal models and game combinations should be checked against their respective setup documentation.

Do I need the Racing Adapter when using RS or PRO pedals with an RS50 or PRO wheelbase?

No. The Racing Adapter is not required for this connection. Compatible RS and PRO pedals can connect directly to the newer wheelbase.

Can I use my old G29 pedals with an RS50 or PRO wheelbase?

Yes, supported older Logitech pedal sets can be used through the Racing Adapter.

Can I use the Driving Force Shifter with an RS50 or PRO wheelbase?

Yes, the Racing Adapter provides the required compatibility.

Can I connect the RS Shifter & Handbrake directly to a PC?

Yes. It can connect through USB and operate as an independent device. Its functions then need to be assigned in the game.

Can I use the RS Shifter & Handbrake with a G29 or G923?

Yes, through the Racing Adapter, but functionality is more limited than when using a direct USB connection to a PC or a compatible newer wheelbase.

Does PC compatibility mean the same peripheral will work on PlayStation or Xbox?

No. Console compatibility depends on the wheelbase, platform-specific product version, connection method and game support.

A USB peripheral that works independently on PC may need to be connected through a compatible Logitech wheelbase when used on a console.

Does G HUB support every Logitech racing peripheral in the same way?

No. The available configuration options depend on the device and how it is connected. Older connection interfaces can also limit how a newer peripheral is identified or configured.


11. Final Thoughts

Logitech's sim racing ecosystem has evolved from integrated wheel-and-pedal packages into a more modular collection of wheelbases, steering wheel interfaces, pedals and accessories.

The G29, G920 and G923 remain part of the ecosystem, even though their connection architecture differs from the newer RS and PRO products.

The PRO and RS50 introduce Direct Drive wheelbases and provide a more flexible approach to building a setup. The RS and PRO pedal ranges, shifters and other accessories expand that modular approach further.

The Racing Adapter is particularly important because it helps bridge the gap between the older and newer generations. It allows supported older peripherals to remain useful when upgrading, and it provides a way to use newer pedals with certain older wheels.

However, compatibility is not simply a matter of whether a connector fits. The host platform, wheelbase, adapter, software and game all play a role.

The most important thing when building a Logitech setup is to check the complete connection path, not just the compatibility of two individual products.

A well-planned configuration can reuse existing hardware, introduce newer components gradually and provide a clear upgrade path without requiring the replacement of everything at once.


12. Official Documentation and References

The following Logitech resources provide additional information about product specifications, setup and compatibility. Compatibility information and supported game lists can change, so the manufacturer's latest documentation should be consulted when planning a specific configuration.

  • Logitech G Sim Racing Configurator - Product combinations and platform selection.
  • What does the Logitech G Racing Adapter enable? - Compatibility between older and newer Logitech peripherals.
  • RS50 PlayStation and PC Setup Guide - Setup and compatibility with older Logitech racing products.
  • Can I use older pedals or the Driving Force Shifter with RS50? - Official RS50 compatibility information.
  • RS Shifter & Handbrake Specifications - Product specifications and supported hardware.
  • RS Shifter & Handbrake Quick Start Guide - Connection methods and operating modes.
  • RS Pedals Setup Guide - USB connection and platform-specific setup.
  • Supported Games with RS Shifter & Handbrake and Racing Adapter - Console game compatibility.
  • Log in to post comments
  • 31 views

Thou shalt not steal!

If you want to use this information on your own website, please remember: by doing copy/paste entirely it is always stealing and you should be ashamed of yourself!
Have at least the decency to create your own text and comments and run the commands on your own servers and provide your output, not what I did!

Or at least link back to this website.

Popular content

Today's:

  • PHP2Shell: Critical PHP Remote Code Execution Vulnerabilities and Website’s Impact
  • €6,000 MacBook Pro: Should I Throw It Away After 6 Years?
  • Proxmox LXC Recovery: What Happens When Your LVM-Thin Pool Runs Out of Space
  • Drupal 7 to Drupal 10 Migration and Configuration Notes
  • TCL 34R83Q — One-Year Long-Term Review
  • Linux Networking: How to disable/enable offload features, RX/TX checksum, scatter, gather and beyond
  • Brigadier: How to use it to Download Boot Camp Drivers
  • Cookies, Cookies, Cookies!
  • Assetto Corsa Rally vs Real Life – La Bollène-Vésubie → Col de Turini | Monte-Carlo Rally
  • The Nano Incident: How a Text Editor Almost Took Down My Database

All time:

  • Linux Networking: How to disable/enable offload features, RX/TX checksum, scatter, gather and beyond
  • Tivoli Storage Manager Client Commands (dsmc commands)
  • Centrify Useful Commands and Information
  • Run ZIM on OS X and create Zim.app
  • How to be sure network interfaces have always the same names
  • Linux backup/restore/reinstall
  • How to add exfat support on RHEL 6
  • Mafia II Joe's Adventures - Playboy Locations
  • HMC commands
  • Command Line Software Update in MacOS

Last viewed:

  • Fanatec ClubSport GT Seat – Long-term Experience
  • Logitech RS Pedals vs PRO Racing Pedals: What's Actually Different?
  • AIX: ssh fail to start on wpar
  • Server-Ready MS-01 - A Small PC with Everything: SFP+, USB4, 2.5gbps LAN, Enterprise SSD, TPM 2.0
  • Razer Gigantus V2 XXL – 5 Months Later (Still Worth It?)
  • OS X: How to get the text console from the login screen
  • SAP Useful Commands for UNIX administrator
  • Logitech G923 vs RS50 vs PRO: Is Newer Actually Better?
  • Networking ABC - questions and answers
  • AIX Misc stuff

@ gz.ro 2011-2026
Page generated in 0.0666 seconds. Served by tar.